Golf Mk4
Assembly overview - pedal cluster |
1 - | Bulkhead |
q | With support for mounting bracket and master cylinder |
2 - | Seal |
q | Always renew |
3 - | Mounting bracket |
q | For mounting clutch pedal |
4 - | Bolt |
5 - | Mounting bracket |
q | For mounting accelerator pedal and brake pedal |
6 - | Self-locking hexagon nut, 25 Nm |
q | Always renew |
7 - | Connecting plate |
8 - | Self-locking hexagon nut, 25 Nm |
q | Always renew |
9 - | Bearing bush |
10 - | Pivot pin |
11 - | Clutch pedal |
q | Removing and installing → Chapter |
12 - | Retainer |
q | Removing and installing → Item |
13 - | Self-locking hexagon nut, 25 Nm |
q | Always renew |
14 - | Master cylinder |
q | Removing and installing → Chapter |
15 - | Supply hose |
16 - | Over-centre spring |
q | Removing and installing → Chapter |
17 - | Over-centre spring mounting |
q | Insert into mounting bracket |
q | To renew master cylinder, removing and installing → Chapter |
18 - | Clutch pedal switch -F36- |
q | Distinguishing → Chapter |
q | Removing and installing clutch pedal switch with rectangular housing → Chapter |
q | Removing and installing clutch pedal switch with round housing → Chapter |
19 - | Stop |
q | For clutch pedal |
q | Installation position → Chapter |
20 - | Self-locking hexagon nut, 25 Nm |
q | Always renew |