Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing interface for portable navigation and infotainment systemJ983 >
< Removing and installing radio / radio navigation systems
Up!
Vehicle electrics
Communication
Infotainment / Radio / radio navigation systems / moving_and_installing_radio/radio_navigation_systems/">Removing and installing radio / radio navigation systems
Removing and installing "RCD 215"
Removing and installing „RCD 215“
Removing and installing „RCD 215“
Special tools and workshop equipment required
t
Radio release tool -T10057-
t
Removal wedge -3409-
Removing:
–
Remove air recirculation switch
-1-
in direction of arrow.
–
Unclip trim
-1-
at corresponding points
-arrows-
using removal wedge -3409- and remove trim
-1-
.
–
Undo and remove screws (1.5 Nm).
–
Remove switch units
-arrows-
with help of removal wedge -3409- and detach connectors.
–
Insert radio release tools -T10057- into openings provided
-arrows-
until they engage.
–
Pull radio out together with trim and detach aerial connector.
–
Squeeze connector locking mechanism
-A-
and swivel locking latch in direction
-B-
.
Installing:
Installation is carried out in reverse order of removal.
Vehicle electrics
Communication
Infotainment / Radio / radio navigation systems / moving_and_installing_radio/radio_navigation_systems/">Removing and installing radio / radio navigation systems
Removing and installing "RCD 215"
Removing and installing interface for portable navigation and infotainment systemJ983 >
< Removing and installing radio / radio navigation systems