volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Checking tail light (tail light cluster) with LEDs in rear lid > < Removing and installing tail light (tail light cluster) with LEDS in rear lid

Golf Mk6

Removing and installing right reversing light bulb
Removing and installing right reversing light bulb
  Note
t  On left-hand drive vehicles, the right reversing light bulb -M17- is only located in the right tail light; on right-hand drive vehicles, only in the left tail light.
t  Installation and removal of right reversing light bulb -M17- are carried out on right side of vehicle. On right-hand drive vehicles, removal and installation of left reversing light bulb -M16- are carried out in the same way.
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
   
–  Unclip service flap -1- in direction of -arrow- out of trim.
  N94-11832
–  Turn bulb carrier -1- of right reversing light bulb -M17- in direction of -arrow- and remove bulb carrier from tail light.
  N94-11833
–  Carefully pull right reversing light bulb -M17--2- in direction of -arrow- out of bulb carrier -1-.
Installing:
Installation is carried out in the reverse sequence.
  N94-11834

Checking tail light (tail light cluster) with LEDs in rear lid > < Removing and installing tail light (tail light cluster) with LEDS in rear lid