Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Installing camshaft adjuster >
< Removing and installing camshaft adjuster
Golf Mk5
Power unit
4-cylinder injection engine (2.0 l engine, direct injection)
Engine cylinder head, valve gear
Valve gear / moving_and_installing_camshaft_adjuster/">Removing and installing camshaft adjuster
Removing camshaft adjuster
Removing camshaft adjuster
Removing camshaft adjuster
–
Remove intake manifold
→ Chapter
.
–
Remove high-pressure pump
→ Chapter
.
–
Remove cylinder head cover
→ Chapter
.
–
Remove housing
-A-
along with camshaft adjustment valve 1 -N205-
-arrows-
.
–
Align mark on camshaft toothed belt pulley with mark on toothed belt guard. The indentations
-arrows-
now point vertically to each other.
–
Fit camshaft clamp -T10252- as shown and secure
-arrows-
.
–
Loosen securing bolt for camshaft adjuster using special wrench, long reach -T40080-.
Engine code AXW:
–
Compress chain tensioner and lock with tensioning bolt -T10092- and M5 nut
-arrow-
.
–
Remove centre securing bolt from chain tensioner
-arrow-
.
Engine codes BLR, BLX, BLY, BVX, BVY, BVZ:
–
Press chain tensioner together
-arrow A-
and secure it with locking pin -T10115-
-arrow B-
.
Continuation for all vehicles:
–
Remove securing bolt from camshaft adjuster and remove camshaft adjuster together with chain.
Power unit
4-cylinder injection engine (2.0 l engine, direct injection)
Engine cylinder head, valve gear
Valve gear / moving_and_installing_camshaft_adjuster/">Removing and installing camshaft adjuster
Removing camshaft adjuster
Installing camshaft adjuster >
< Removing and installing camshaft adjuster